Travertine is a unique limestone with many pores and veins. These features give the travertine floor tiles a milled look and natural beauty. This stone is available in many shades of earthy colors and different finishes. These stones have found uses on many applications like countertops, pavers, columns, stair treads, sinks and bathtubs. This natural stone is incredibly durable and many ancient structures still retain the walls and floors based on travertine. It is an environmentally friendly product, as it has no harmful chemicals and with proper care, can stay bright and lively for a long time. In our kitchens, we treat the floor in a rough way, which can result in some damage to the travertine floor. These small damages are easily repaired as a DIY project at home on the weekends.

General use, high traffic, pets and movement of furniture can cause damage to the kitchen floor. This is the most used room, and the damages do not need an expert for repairing them. You can repair these tiles in a few easy steps. Follow this process and repair them quickly.

1. When you find a damaged spot in the flooring, get the required travertine fill powder from the store to repair it.

2. Mix the travertine fill powder with enough water and make it into a paste.

3. You might need some simple tools to repair the damaged travertine floor tiles. A putty knife is quite handy. Using this tool, fill the damaged spot with the paste.

4. The filled spot should dry and set completely, before you walk on that area.

5. While using the fill mix, follow the instructions given on the label. The instructions tell you the setting time clearly.

6. After it is completely set, use a sand paper and sand the filled area. Use a orbital sander at a low speed. You can also use a sand paper with fine grit for this purpose. You can sand this area until the patch has an even surface and is at the same level as the other tiles.

7. It is important to apply a sealant after to complete this process. Apply the sealer until the patch has a shine similar to the other tiles.

Some travertine floor tiles have numerous holes that need filling. These holes would have developed during the process of stone formation, when water vapor escapes the mud. To help the stone’s integrity, these holes need filling with an epoxy grout or resin. This way, you can restore the strength of the stone tile.

Article Source:

Leave a Reply

  • (will not be published)